£14.95 - £17.95 / SQ M

AirMesh Flag 115gsm

Benefits

5.0/5 4 Review(s)5.0
  • Colour fast and fade proof long term durability
  • FREE finishing at no extra cost including eyelets, pockets etc
  • Full Colour Printing

PRICING TABLE

  • Total Area (Sq M)

    Price

  • 0 - 10 SQ M
    £17.95 / SQ M
  • 10 - 20 SQ M
    £16.95 / SQ M
  • 20+ SQ M
    £14.95 / SQ M

Dye-Sub Printed AirMesh Flag

AirMesh Flag Mesh Fabric Banner 115gsm is a very thin and strong polyester fabric textile which allows the printed graphics to be seen from both sides. Used for giant flags and banners and any flags or banners installed in potentially windy locations. Also ideal as stadium pitch flags, crowd flags, speaker mesh at concerts and as heras fencing covers.

read more...

Calculate cost and order1. Enter Size size icon

Select measurement units:

There is a minimum order price on this product of £60

Multiple Artworks?

Select your Finishing2. Select Finishing finishing icon

Need more information on Pole Pockets?

Finishing Options *

Pole Size

Finishing Instructions

Packaging

As standard all our fabrics are sent out folded. This means that some fabrics may arrive with slight creases. These can be easily ironed out on a low heat or will fall out over time once hung. Alternatively, fabrics can be sent out on a 2.5m roll, however, this will incur an additional £25 to cover extra packaging and delivery.

Upload your files3. Upload Artwork artwork icon


Need Help?

Call us: 01253 897 840

Email us: Send message



Plain packaging. All orders sent
plain wrap.

more info »

Delivery Van. Free delivery on most
orders over £250.

more info »


Turnaround:

Next Artwork Deadline


Order Summary

Width:

Height:

Area:

Finishing:

Artwork:


SQ M Price:

Unit Price:

Total Price:

Add to Basket

Discount codes to be added at checkout

More information Back to top

Reduce Wind Loading

AirMesh Flag Mesh Fabric Banner contains thousands of tiny holes which allows wind to pass through. This significantly reduces structural wind-loading making it ideal for fencing, high installations and giant banners.

AirMesh Flag Specifications

  • 115gsm Polyester fabric, strong yet lightweight
  • Flame Retardant, certificate available to download
  • Dye-sublimation printed for vivid colours

AirMesh Fabric Banner Finishing

Crucial to the quality and longevity of any AirMesh Flag are the methods used to finish it. We offer stitched hems, eyelets and/or pole pockets as standard. Options include Grab Handles, Velcro, Silicone Strip, Keder and much more. Check our Guide to Pole Pockets on Banners.

Airmesh Flag 115gsm Sizes

We print Airmesh Flag fabric on rolls up to 3m wide. Larger banners are stitch seamed together in panels.

AirMesh Fabric Banner Printing

Printing of Mesh Fabric banner is by digital dye-sublimation, producing vivid deep colours. We print in CMYK meaning that you can include any logos, text and photographs in your designs.

Alternative Products

AirMesh Flag is an ideal solution for many applications. Here are some alternatives for you to consider…

Mesh Banner

Larger and more exposed banners will act as a giant sail when the wind hits. This can rip the banner from its fixings or cause damage to the structure it is fitted to. Mesh PVC and Fabric materials benefit from thousands of tiny holes which allow some wind to pass through, thus reducing wind loading.

Fabric Banners

We offer a wide range of polyester and cotton based fabrics suitable for internal and external banners. Fabrics benefit from looking better, being much lighter (from 115gsm) and from being more environmentally-friendly. Fabrics are printed using our dye-sublimation process which produces stunning rich hues and vibrant eye-popping colours.

Check our Guide to Pole Pockets on Banners.

Technical Specifications Back to top

Material

115gsm polyester

Material Weight

115gsm

Single or Double Sided

Single sided with almost full show-through

Print Process

Digital dye-sublimation

Print Resolution

1440dpi

Print Spec

Full Colour

Fire Rating

B1

Artwork Spec

Set with no bleed - Make sure that there is a free area all around of at least 50mm for hem and eyelets.

Artwork Guidelines Back to top

DOWNLOAD: artwork-guidelines.pdf

FILE FORMATS WE ACCEPT
PDF, Jpeg, PSD, eps (CS 6 or earlier) Ai, (CS 6 or earlier)

COLOURS
We only accept files converted to CMYK.

SCALE
We accept files at
Actual size or
1:2 scale (50% actual size)
1:5 scale (20% actual Size)
1:10 scale (10% actual size)
1:20 scale (5% actual size)

DPI
The ideal DPI is 125dpi if possible. At 125dpi this can make very large graphics huge in memory size, so on larger graphics i.e. 5m x 2.5m you can go down as low as 50dpi. As a rule the larger the graphic the greater the viewing distance hence the lower the dpi can be.

Small / medium sized graphics 125 PPI (DPI) Large sized graphics 50-100PPI (DPI)

FONTS / TYPE
Please make sure that all text is created to outlines / curves before uploading. Even on PDF files make sure you create outlines before saving.

BLEED
No Thanks, No bleed is required on your artwork.

CLEAR AREA
Please leave a clear area of 50mm to allow for eyelets. (Please ensure that all text / logos / critical information is more than 50mm from the edge of your artwork) Background colours and images are fine going into the clear areas.

POLE POCKETS
When ordering make sure you select the finished overall size of your banner including the pockets. So if you select a 1m wide x 2m height, then we will manufacture the banner to a total the height of 2m including the pockets.
(clear areas on pole pockets)
Please make sure that you leave a clear area for your pockets. The term ‘clear area’ means no items of text or logos to run into these areas. Background colours or hackgrtoudn images are fine, just no readable text or logos. So if you are ordering a 1m wide x2m height banner with pole pockets top and bottom, then please keep the bottom 150mm free and the top 150mm free from text and logos. This will make the overall visual area 1m wide x 1.7m height.
Double sided banners
We have special software which flips certain parts of your banners so as to create a seamless pocket on the opposite side. When ordering a double sided banner please just follow the above steps, as the file(s) will need to be set up in the same way. If you require a different image on each side of your double sided banner not a problem, just upload x2 files stating that you require a different image on each side.

COLOUR MATCHING
We can match pantones if required at an additional charge (please contact us before proceeding) as this is costed per job. We cannot guarantee an exact match on colours due to limitations of the CMYK print process but will try to achieve as close as physically possible.

FAQ Back to top

Is air mesh flag stronger than air mesh pvc?

Yes it is stronger. Air Mesh flag is a polyester fabric which is very strong and lightweight.

Can I have my parcel sent in plain packaging?

Yes. All items are sent under plain wrap. Non of our items will be branded in any way.

What is the specification of your banner eyelets?

We use nickel-plated silver eyelets which have a 12mm opening. We arrange the eyelets every 500mm. If you require less or more eyelets please advise us in the additional info box.

Reviews Back to top

4 reviews for AirMesh Flag 115gsm

  1. Rated 5 out of 5

    Sound and Lighting (verified owner)

    Perfect for covering our speaker stacks, many thanks to the team at Banner World who went the extra mile to get these sorted in time.

  2. Rated 5 out of 5

    Design Construction (verified owner)

    We ordered 42 large fence panels and were delighted with them. We will be coming back for more.

  3. Rated 5 out of 5

    JL Scaffolding (verified owner)

    Very lightweight, ideal for our high-up scaffold banners and fencing scrims

  4. Rated 5 out of 5

    Greggs (verified owner)

    Super colours, very impressed, will order more.

Add a review