Mesh Hanging Banner – Lightweight and Windproof
Mesh Banner is lighter in weight than a traditional frontlit banner. Normal PVC outdoor banners are not recommended in winds of 30mph+ as hems and eyelets can be ripped out. Remember that a large non-mesh banner acts as a giant sail. Gusts of wind can easily destroy it as well as affect the structure it is fitted to. Larger non-mesh banners are fine as long as they are fitted against a solid surface or within a fixed wall-mounted tension-frame system.
Although they cost the same initially as a standard PVC Banner, thanks to a much lower wind resistance factor, Mesh Banners last much longer outdoors in typical British weather conditions – making them cheaper in the long run.
Why use a Mesh Hanging Banner?
- Lighter and easier to fit
- Allows wind to pass through
- Reduces wind loading on fences, cafe barriers and scaffolding
- Acoustically transparent for use over concert speakers
- Hardwearing and scuff resistant
Mesh Banner Specifications
- M1/B1 Flame Retardant product with certificate available
- High quality reinforced 330gsm mesh material
- Nickel plated eyelets with 12mm diameter hole
- Ideal indoors or outdoors
- Scratch and fade resistant
Any Design, Any Size
Our UV and Solvent printing machines print high resolution mesh panels at up to 5 metres in width. Larger banners are welded together allowing us to create windproof banners at any size. Design your artwork any way you like, just submit it to us as a CMYK PDF for best results. You can include background images, photographs, logos and text. Check our Artwork Guide for full instructions.
Fitting Mesh Hanging Banners
A professional survey of your intended installation site is advisable for any banners over 25 square metres in size. A surveyor will calculate wind-loading on the structure and advise on the fixings necessary.
Larger Mesh Banners such as Building Wraps are normally installed in sections, straight onto scaffolding using Bungee Shock Cord. Your scaffolder should ensure that no pole ends are projecting that they may damage your banner.
Without scaffolding, large mesh banners can also be installed using a wire cable frame and a criss-cross effect of bungee rope. This method allows even more give when the wind hits the mesh banner and ensures a secure and long-lasting installation.
Finishing Mesh Hanging Banners
As standard we hem and eyelet our Mesh Banners all round with webbing and metal eyelets. Pockets to slide poles through can be provided at no extra cost, please specify the pole diameter in your order notes. Check our Guide to Pole Pockets on Banners.
As an option you can select Heavy Duty Hems and Eyelets, recommended if your mesh banner is over 10 square metres in size.
Material Specification
Our Mesh Banner material is waterproof and flame retardant to B1 standard thanks to a special coating, making it ideal for use indoors or outdoors. Strengthening within the mesh makes it tear and rip resistant to normal pressures too.
Free Delivery on Orders over £250
We deliver Mesh Hanging Banners for free if your order totals over £250 excluding VAT.
Design Guide for Mesh Banners
Set your dimensions correctly
Please set your artwork to the correct dimensions of your final printed mesh banner. We do not require any bleed on the artwork for a printed mesh. If necessary, you can set your artwork to scale.
Set the correct CMYK colour settings
Please make sure that you set your colour settings to CMYK. Our mesh banner printers use a full colour solvent printing process which works using a CMYK Process. Files that are sent to use using an RGB setup will be changed automatically. Sometimes this can make the colours on your mesh printed banner seem weak & washed out. We will check for this before printing and contact you if required.
Position of eyelets on your Printed Mesh Hanging Banners
Please leave clear area approx 50mm inside the outside of the banner. Background colour / images are fine, just no important text elements, small print or logos as these can be obscured by the eyelets. Around our mesh banners we will add hem and eyelets unless otherwise stated. It is not advised to have just eyelets (without the hem) as this can cause the material to rip.
We space our eyelets approx every 500mm apart unless otherwise stated. Eyelets will be evenly spaced so eyelet spacing might vary slightly on different sizes of banners.
Pole Pockets on Mesh Hanging Banners
We can finish your mesh banners with pole pockets if required. Please make sure when ordering / setting of your artwork that your artwork / finished file size is set to the finished overall size of the banner including the pole pockets. Standard scaffold tubes are a 150mm flat pocket size to fit comfortably with plenty of space as to not cause to much tension on the pocket seam. Please ensure that you leave a clear area at the top and the bottom of the banners to allow for the pockets. To explain – if your banner is 2m height please set to 2m height and then make sure that no text, logos and its info enters the top 150mm or bottom 150mm of the design area. Solid colour/ background images or patterns are fine just not text or vital information. Check here for more information on
pole pockets and how to design for them.
Design Principles for Mesh Hanging Banners
Because mesh banners are used for advertising its always important to think of viewing distances. Always create your artwork to give the highest possible impact. Contrasting colours will give your banner much more clout than washed out subtle colours.
Also think about text sizes. The larger the text the more it will be viewed from a distance. Use upper and lower fonts. Look at road signs as they are all in upper and lower type rather than all capitals. Subconsciously your eyes will read upper and lower (sentence case). Font type…. Normally clearer fonts work better than stripy unreadable fonts. Look at most main brands, i.e. McDonalds, IKEA, B&Q, Dominos Pizza – all these companies use very readable fonts and typefaces.
Less is more, cramming every little bit of information onto your mesh banner probably isn’t a good idea. Remember to use clear areas of space and give your design space to breathe. The best adverts are always simple and straight to the point. Remember your average viewer needs to read your message in 3 seconds or less.
1 review for PVC Mesh Hanging Banners
Kim Oswell (verified owner) –
Used a few times great service and reliable staff at a great price couldn’t recommend enough ! Will definitely used again in the future
Based on 113
Google Reviews