Construction Signs
Our solutions include mesh banners, scaffold signs, fence covers, health and safety boards, hoarding panels and site boards.
All custom-made to any size and to any specification.
Sub Categories
Building Wraps
View ProductsOur Giant Building Wraps can be made from a variety of fit-for-purpose materials and fabrics including pvc and polyester. They are typically used to dress a building during renovation or construction.Full colour printed using UV or Dye-Sub methods, Building Wraps provide stunning graphic effects. Some of our favourites include photographs of an original building before renovation begins. Rather than just seeing scaffolding, viewers can now see an image of the actual building behind.Materials have tiny holes which allow air to pass through, reducing the wind-load on a structure. A professional survey of your intended installation site is advisable for building wraps over 25 square metres in size. A survey will calculate wind-loading on the structure.Where scaffolding is not already in place, large building wraps can be installed using a wire cable frame and a criss-cross effect of bungee shock cord. This method allows even more give when the wind hits and ensures a secure and long-lasting installation.
Printed Mesh Fencing
View ProductsBanners for Fences Solutions for printed mesh fencing. We print and supply a variety of mesh materials ideal for fencing. We produce banners for individual panels or for long runs, supplied on a roll. Reduce Windloading with Mesh Our specialist mesh materials with wind holes reduce wind-loading on fence panels whilst still providing a superb graphic impact for information and advertising. AirMesh Flag 115gsmAirMesh Flag is recommended as the most suitable material for Mesh Fencing Covers. A strong but lightweight 115gsm Polyester Fabric with micro-holes to allow wind gusts to pass through. Full colour printed using dye-sublimation technology, these covers are vibrant and eye-catching. PVC Mesh 330gsm PVC Mesh is an ideal material for Mesh Fence Covers. Micro holes in the material allow wind to pass through. PVC AirMesh 300gsm This PVC Mesh has a more open weave, allowing more air to pass through whilst still providing graphic impact.
Scaffold Banners
View ProductsBanner World are experts in Scaffold Banners and Scaffolding Signs, with years of experience. Our Banners, Building Wraps and Signs are all heavy duty, built-to-last, and fit-for-purpose.Scaffold Banners can be made to any size to suit your requirements, from small 1m x 1m banners right up to huge building wraps.We use only the best materials, including our flame-retardant rip-stop PVC. Banners are finished with heavy-duty hems, metal eyelets and tough welded pockets as standard. Our high production and finishing specifications are crucial to the lifespan of a scaffold banner, we have seen many from other suppliers fade within weeks or simply rip themselves from fixings in high winds.Our very low prices are based on the high volume of Scaffold Banners and Scaffolding Signs we produce every week, plus our efficiency of design and manufacture.You can place an order for just one Banner or Sign, or for hundreds. Scaffold Banner Material Specification Our standard scaffold banners are made from our tried and tested 500gsm Rip-Stop PVC which can be printed single sided in full colour. The extra strength in this material reduces the stress caused by weather conditions up on scaffolding, making it last longer and look better for longer than cheaper materials used by other suppliers.Premium Scaffolding Banners are made from our almost indestructible 650gsm Blockout PVC which can be printed on both sides.Larger Scaffolding Banners are recommended to be made with one of our Mesh PVC materials. Tiny holes in this material allow wind to pass through and reduce wind-load on scaffolding structures. Standard Mesh has a 70/30 print surface to hole ratio, whilst our AirMesh PVC has a more open weave to allow even more air to pass through.Mesh also has the advantage of letting light through into the building behind.All our scaffold banner materials are flame retardant, waterproof and weather resistant. We print using fade-proof inks to ensure your banners remain vibrant and visible even in exposed locations.Please contact us if you have any special requirements for your scaffold banners such as odd shapes or specific finishing instructions, we're always glad to help. Scaffold Banner Finishing Typical Scaffold Banners can be finished with any combination of welded/stitched hems, secure metal eyelets and pole pockets - included in the price.We can advise on the best finishing options for your scaffold banners, based on their dimensions and location. Scaffold Banner Installation Smaller Scaffold Banners can be specified with sleeve pockets top and bottom through which you can slide scaffold poles. Adjusting the gap between the poles allows you to tension the banner and prevent it from flapping around and being damaged.Larger scaffold banners are best finished with hems and eyelets, allowing you to fix them to an oversized scaffold frame using bungee cord or shock cord. Shock cord should be threaded though the eyelets in short sections and tied off. Avoid using cable ties or standard rope as these do not offer any give during wind gusts. Scaffold Banner Artwork Guidelines Please ensure your artwork is print-ready and conforms with our requirements here. Our staff will always check your artwork files and contact you immediately with any queries prior to printing.
Products
Building Wraps
View ProductsOur Giant Building Wraps can be made from a variety of fit-for-purpose materials and fabrics including pvc and polyester. They are typically used to dress a building during renovation or construction.Full colour printed using UV or Dye-Sub methods, Building Wraps provide stunning graphic effects. Some of our favourites include photographs of an original building before renovation begins. Rather than just seeing scaffolding, viewers can now see an image of the actual building behind.Materials have tiny holes which allow air to pass through, reducing the wind-load on a structure. A professional survey of your intended installation site is advisable for building wraps over 25 square metres in size. A survey will calculate wind-loading on the structure.Where scaffolding is not already in place, large building wraps can be installed using a wire cable frame and a criss-cross effect of bungee shock cord. This method allows even more give when the wind hits and ensures a secure and long-lasting installation.
Printed Mesh Fencing
View ProductsBanners for Fences Solutions for printed mesh fencing. We print and supply a variety of mesh materials ideal for fencing. We produce banners for individual panels or for long runs, supplied on a roll. Reduce Windloading with Mesh Our specialist mesh materials with wind holes reduce wind-loading on fence panels whilst still providing a superb graphic impact for information and advertising. AirMesh Flag 115gsmAirMesh Flag is recommended as the most suitable material for Mesh Fencing Covers. A strong but lightweight 115gsm Polyester Fabric with micro-holes to allow wind gusts to pass through. Full colour printed using dye-sublimation technology, these covers are vibrant and eye-catching. PVC Mesh 330gsm PVC Mesh is an ideal material for Mesh Fence Covers. Micro holes in the material allow wind to pass through. PVC AirMesh 300gsm This PVC Mesh has a more open weave, allowing more air to pass through whilst still providing graphic impact.
Scaffold Banners
View ProductsBanner World are experts in Scaffold Banners and Scaffolding Signs, with years of experience. Our Banners, Building Wraps and Signs are all heavy duty, built-to-last, and fit-for-purpose.Scaffold Banners can be made to any size to suit your requirements, from small 1m x 1m banners right up to huge building wraps.We use only the best materials, including our flame-retardant rip-stop PVC. Banners are finished with heavy-duty hems, metal eyelets and tough welded pockets as standard. Our high production and finishing specifications are crucial to the lifespan of a scaffold banner, we have seen many from other suppliers fade within weeks or simply rip themselves from fixings in high winds.Our very low prices are based on the high volume of Scaffold Banners and Scaffolding Signs we produce every week, plus our efficiency of design and manufacture.You can place an order for just one Banner or Sign, or for hundreds. Scaffold Banner Material Specification Our standard scaffold banners are made from our tried and tested 500gsm Rip-Stop PVC which can be printed single sided in full colour. The extra strength in this material reduces the stress caused by weather conditions up on scaffolding, making it last longer and look better for longer than cheaper materials used by other suppliers.Premium Scaffolding Banners are made from our almost indestructible 650gsm Blockout PVC which can be printed on both sides.Larger Scaffolding Banners are recommended to be made with one of our Mesh PVC materials. Tiny holes in this material allow wind to pass through and reduce wind-load on scaffolding structures. Standard Mesh has a 70/30 print surface to hole ratio, whilst our AirMesh PVC has a more open weave to allow even more air to pass through.Mesh also has the advantage of letting light through into the building behind.All our scaffold banner materials are flame retardant, waterproof and weather resistant. We print using fade-proof inks to ensure your banners remain vibrant and visible even in exposed locations.Please contact us if you have any special requirements for your scaffold banners such as odd shapes or specific finishing instructions, we're always glad to help. Scaffold Banner Finishing Typical Scaffold Banners can be finished with any combination of welded/stitched hems, secure metal eyelets and pole pockets - included in the price.We can advise on the best finishing options for your scaffold banners, based on their dimensions and location. Scaffold Banner Installation Smaller Scaffold Banners can be specified with sleeve pockets top and bottom through which you can slide scaffold poles. Adjusting the gap between the poles allows you to tension the banner and prevent it from flapping around and being damaged.Larger scaffold banners are best finished with hems and eyelets, allowing you to fix them to an oversized scaffold frame using bungee cord or shock cord. Shock cord should be threaded though the eyelets in short sections and tied off. Avoid using cable ties or standard rope as these do not offer any give during wind gusts. Scaffold Banner Artwork Guidelines Please ensure your artwork is print-ready and conforms with our requirements here. Our staff will always check your artwork files and contact you immediately with any queries prior to printing.
PVC Mesh Banners 330gsm
£9.50 - £10.50 / SQ M More Information4.9/5 - 12 Review(s)Long Lasting Outdoor Mesh Banners Superbly printed using fade-resistant inks, our mesh banners are finished with welded hems, eyelets and/or pole pockets to the highest standards in the industry. When correctly fitted they will last years outdoors, in sun, wind and rain. Strong, yet lets wind through Mesh is lighter in weight than a traditional frontlit banner. Normal PVC banners are not recommended in winds of 30mph+ as hems and eyelets can be ripped out. Remember that a large non-mesh banner acts as a giant sail. Gusts of wind can easily destroy it as well as affect the structure it is fitted to. Larger non-mesh banners are fine as long as they are fitted against a solid surface or within a fixed wall-mounted tension-frame system.Although they cost the same initially as a standard PVC Banner, thanks to a lower wind resistance factor, Mesh Banners last much longer outdoors in typical British weather conditions - making them cheaper in the long run. Why use a Mesh Banner?Lighter and easier to fit Allows wind to pass through Reduces wind loading on fences, cafe barriers and scaffolding Acoustically transparent for use over concert speakers Hardwearing and scuff resistantMesh Banner SpecificationsM1/B1 Flame Retardant product with certificate available High quality reinforced 330gsm mesh material Nickel plated eyelets with 12mm diameter hole Strong welded hems and pockets Ideal indoors or outdoors Scratch and fade resistantAny Design, Any Size Our UV and Solvent printing machines print high resolution mesh panels at up to 5 metres in width. Larger banners are welded together allowing us to create windproof banners at any size. Design your artwork any way you like, just submit it to us as a CMYK PDF for best results. You can include background images, photographs, logos and text. Check our Artwork Guide for full instructions. Alternatives to Mesh Banner 330gsm We offer a range of mesh banner materials. Here are some alternatives for you to consider... PVC AirMesh Banner This is a lighter material with more holes, resulting in more air being able to pass through the material. Typically used for higher, more exposed locations where wind loading will be an issue. AirMesh Flag 115gsm At only 115gsm, AirMesh Flag is our lightest mesh fabric. As a polyester-based fabric, it is also much more environmentally friendly than PVC products. Express Mesh Banner Ideal for smaller mesh banners required very quickly. Printed on our smaller machines and limited in size to 1.25m in one dimension. Artwork Quality Checks Our pre-press experts will quality check your artwork before sending to print. Any sizing or image resolution issues will be referred back to you berfore we proceed. Fitting Mesh Banners A professional survey of your intended installation site is advisable for any outdoor banners over 25 square metres in size. A surveyor will calculate wind-loading on the structure and advise on the fixings necessary.Larger Mesh Banners such as Building Wraps are normally installed in sections, straight onto scaffolding using Bungee Shock Cord. Your scaffolder should ensure that no pole ends are projecting that they may damage your banner.Without scaffolding, large mesh banners can also be installed using a wire cable frame and a criss-cross effect of bungee rope. This method allows even more give when the wind hits the mesh banner and ensures a secure and long-lasting installation. Finishing Mesh Banners As standard we hem and eyelet our Mesh Banners all round with webbing and metal eyelets. Pockets to slide poles through can be provided at no extra cost, please specify the pole diameter in your order notes. Why choose Hems and Eyelets on a Banner? Hem and eyelets are the most common finishing method on a mesh banner. We add eyelets every 500mm unless otherwise specified. We can add more eyelets if required. If you require more eyelets please enter this information into the ‘Additional Information’ box when ordering. The best ways to attach a mesh banner using eyelets include zip ties, bungee chord, large penny washers (large washers with a small hole) or tech bolts (self drilling cladding bolts).As an option you can select Heavy Duty Hems and Eyelets, recommended if your mesh banner is over 20 square metres in size.Applications that might require a hem and eyelets include:Walls (screw into the brick using wide-head screws and penny washers) Fences / railings, attached using zip ties Scaffolding (Zip ties or bungee chord) Metal cladding (tech bolts and penny washers)Why do I need Pole Pockets? We can manufacture your mesh PVC banner with pole pockets if required. A pole pocket allows the banner to slide over a pole or cable to aid fitting. We can manufacture pole pockets to any size you require. As well as a pole pocket we can add additional eyelets if required.Sometimes a pole pocket is required on an internal application. This is normally where a weighted bar/ dowel or sometimes broom handle or similar can be placed inside the bottom pocket to act as a weight to tension the banner. This creates a more rigid appearance and is less likely to blow around.Applications that might require a pole pocket include:Scaffolding Rigging or stage sets Application where a cable or tensioned rope is required to fix the banner Lamp post banner brackets Projecting banner brackets To add tension by adding a weighted dowel or rod to the bottom pocket for hanging internallyCheck our Guide to Pole Pockets on Banners. Design Guide for Mesh Banners Set your dimensions correctly Please set your artwork to the correct dimensions of your final printed mesh banner. We do not require any bleed on the artwork for a printed mesh. If necessary, you can set your artwork to scale. Set the correct CMYK colour settings Please make sure that you set your colour settings to CMYK. Our mesh banner printers use a full colour solvent printing process which works using a CMYK Process. Files that are sent to use using an RGB setup will be changed automatically. Sometimes this can make the colours on your mesh printed banner seem weak & washed out. We will check for this before printing and contact you if required. Position of eyelets on your Printed Mesh Banners Please leave clear area approx 50mm inside the outside of the banner. Background colour / images are fine, just no important text elements, small print or logos as these can be obscured by the eyelets. Around our mesh banners we will add hem and eyelets unless otherwise stated. It is not advised to have just eyelets (without the hem) as this can cause the material to rip.We space our eyelets approx every 500mm apart unless otherwise stated. Eyelets will be evenly spaced so eyelet spacing might vary slightly on different sizes of banners. Pole Pockets on Mesh Banners We can finish your mesh banners with pole pockets if required. Please make sure when ordering / setting of your artwork that your artwork / finished file size is set to the finished overall size of the banner including the pole pockets. Standard scaffold tubes require a 150mm flat pocket size to fit comfortably with plenty of space as to not cause to much tension on the pocket seam. Please ensure that you leave a clear area at the top and the bottom of the banners to allow for the pockets. To explain - if your banner is 2m height please set to 2m height and then make sure that no text, logos and important info enters the top 150mm or bottom 150mm of the design area. Solid colour/ background images or patterns are fine just not text or vital information. Check here for more information on pole pockets and how to design for them. Mesh Banner Design Principles Because mesh banners are used for advertising its always important to think of viewing distances. Always create your artwork to give the highest possible impact. Contrasting colours will give your banner much more impact than washed out subtle colours.Also think about text sizes. The larger the text the more it will be able to be read from a distance. Use upper and lower fonts. Look at road signs as they are all in upper and lower type rather than all capitals. Subconsciously your eyes will read upper and lower (sentence case). Font type…. Normally clearer fonts work better than stripy, script or unreadable fonts. Look at most main brands, i.e. McDonalds, IKEA, B&Q, Dominos Pizza - all these companies use very readable fonts and typefaces.Less is more, cramming every little bit of information onto your mesh banner probably isn’t a good idea. Remember to use clear areas of space and give your design space to breathe. The best adverts are always simple and straight to the point. Remember your average viewer needs to read your message in 3 seconds or less.More Mesh Banner products here.
Premium Barrier Fencing Covers
£14.95 - £17.95 / SQ M More Information5.0/5 - 1 Review(s)Premium Branding Opportunity Premium Barrier Fencing Covers allow users to cover an unsightly or private area and advertise brands and events with maximum impact on prime advertising space. Finished Premium Barrier Fence Cover Suitable for use on construction sites, residential properties and public events such as festivals.Fully weatherproof Ready to fit Full colour printed Fire rated fabric Perfect for brand promotions Cover unsightly areas from view Simple yet effective advertising Machine washablePremium Barrier Fence Cover Specifications115gsm polyester airmesh fabric Flame retardant with downloadable fire certificate Fade proof and scratch resistant Single sided print, the reverse shows a mirror image.Printed from your Artwork Premium Barrier Fence Covers are printed to order from your artwork. As our printing is full-colour process you can include photographs, logos and any other graphic elements in your design. Reusable and Transportable Fully re-usable, these fence covers can be easily removed and used again and again to promote your event or brand.Easy to pack and transport, each cover weighs in at less than 0.5kg and can be folded to 25cm x 25cm x 5cm for storage. Used across Europe Banner World Premium Barrier Fence Covers are used by major event organisers and construction site managers around the UK and Europe. We manufacture these Covers to order and to any bespoke size or finishing requirements.As an alternative to individual fence covers, we can supply AirMesh Flag as a continuous length or in 10m, 20m and 50m sections. This is ideal when you need to wrap an entire length of fencing in one hit.Fence Cover Design Tips Get your cover size right You can design your fence cover at actual size or to scale, depending on the software you use. Ensure that your final print file will scale up in proportion to the size of cover you have ordered. Allow for Eyelets in your design Ensure that no critical information is within 100mm of the edge of your cover design, this allows room for eyelets, hems and other finishing options. Background images and graphics are fine, just be wary of text, numbers and logos. Your artwork should be set to CMYK Set your artwork to CMYK, as this matches the print process. If your artwork is in RGB mode, the colours may not come out as expected. Colour Matching Colour matching to Pantone references is possible, but may take longer and will incur an extra charge. Files including pantone colours will be converted to CMYK unless you specify a colour match in your order. Design Principles Fence covers are first and foremost an advertising medium. Information displayed should be clear to read – consider how far away your target audience will be. If your cover is intended to be viewed from a distance then the contrast should be high and typefaces need to be legible. If you try to cram too much information onto a banner then the text may end up too small to read!
Premium Heras Fencing Covers
£65.00 - £95.00 / each More Information5.0/5 - 2 Review(s)Ideal Branding Opportunity on Fencing Premium Heras Fencing Covers allow users to cover an unsightly or private areas whilst advertising brands and events with maximum impact on prime advertising space.Unlike separate advertising banners and signage, Heras Fence Covers rarely need planning permission in city centre locations. Whilst hoarding panels are generally a one-off use product, Heras Fence Covers can be used again and again on multiple sites.Custom sizes are available, see our AirMesh Flag product page. Finished Heras fence cover 3370mm x 1755mmFully weatherproof Ready to fit Perfect for brand promotions Cover unsightly areas from view Simple yet effective advertisingPremium Heras Fence Cover Specifications115gsm polyester airmesh fabric Flame retardant with downloadable fire certificate Fade proof and scratch resistantPrinted from your Artwork Premium Heras Fence Covers are printed to order from your artwork. As our printing is full-colour process you can include photographs, logos and any other graphic elements in your design. Reusable and Transportable Fully re-usable, these fence covers can be easily removed and used again and again to promote your event or brand.Easy to pack and transport, each cover weighs in at less than 1kg and can be folded to 45cm x 45cm x 5cm for storage. Used on Construction Sites across Europe Banner World Premium Heras Fence Covers are used by major event organisers and construction site managers around the UK and Europe. We manufacture these Covers to order and to any bespoke size or finishing requirements.As an alternative to individual fence covers, we can supply AirMesh Flag as a continuous length or in 10m, 20m and 50m sections. This is ideal when you need to wrap an entire length of fencing in one hit. Alternatives to Heras Premium We offer a range of mesh banner materials for use on Heras Fence Panels. Here are some alternatives for you to consider… PVC Mesh 330gsm Our standard building and fencing printed pvc mesh banner, the least-cost option. PVC AirMesh Banner This is a lighter pvc material with more holes, resulting in more air being able to pass through the material. Typically used for more exposed locations where wind loading will be an issue.Heras Fence Cover Design Tips Get your size right You can design your cover at actual size or to scale, depending on the software you use. Ensure that your final print file will scale up in proportion to the size of banner you have ordered. Use our downloadable PDF template. Allow for Eyelets in your design Ensure that no critical information is within 100mm of the edge of your heras cover design, this allows room for eyelets, hems and other finishing options. Background images and graphics are fine, just be wary of text, numbers and logos. Our PDF artwork template shows safe areas. Your artwork should be set to CMYK Set your artwork to CMYK, as this matches the print process. If your artwork is in RGB mode, the colours may not come out as expected. Colour Matching Colour matching to Pantone references is possible, but may take longer and will incur an extra charge. Files including pantone colours will be converted to CMYK unless you specify a colour match in your order. Design Principles Fence covers are first and foremost an advertising medium. Information displayed should be clear to read – consider how far away your target audience will be. If your cover is intended to be viewed from a distance then the contrast should be high and typefaces need to be legible. If you try to cram too much information onto a cover then the text may end up too small to read!
PVC Mesh Heras Fencing Covers
£49.00 - £65.00 / each More Information5.0/5 - 1 Review(s)PVC Mesh Heras Fencing Covers allow users to cover an unsightly or private area whilst advertising brands and events with maximum impact on prime advertising space.Unlike other advertising banners and signage, Heras Fence Covers rarely need planning permission in city centre locations. Whilst hoarding panels are generally a one-off use product, Heras Fence Covers can be used again and again on multiple sites.Heras fence banners are typically installed using plastic cable ties.IMPORTANT: Some heras-style fence panels may vary slightly in size. Please check the size of you panels and advise accordingly if different from 3.5m x 2m.Custom sizes are available, see our PVC Mesh product page. We can supply as individual fence panels or as continuous lengths to wrap around an entire perimeter in one go.Finished Heras fence cover 3380mm x 1770mmFully weatherproof Ready to fit Perfect for brand promotions Cover unsightly areas from view Simple yet effective advertising
PVC AirMesh Heras Fencing Covers
£58.00 - £74.00 / each More InformationDesigned to fit a standard Heras Fence Panel (3.5m x 2m) (cover size: 3370mm x 1755mm), our PVC AirMesh Heras Fencing Covers are custom-made from a 235gsm exceptionally lightweight and high quality PVC AirMesh fence cover fabric to reduce wind loading. Full colour printed using UV ink technology for vibrant, hard-wearing and weatherproof performance. Complete with strong stitched hems and metal eyelets for easy fixing using cable ties or bungee clips. These banners look superb.PVC AirMesh Heras Fencing Covers allow users to cover an unsightly or private areas whilst advertising brands and events with maximum impact on prime advertising space.Unlike separate advertising banners and signage, Heras Fence Covers rarely need planning permission in city centre locations. Whilst hoarding panels are generally a one-off use product, Heras Fence Covers can be used again and again on multiple sites.Custom sizes are available, see our PVC AirMesh product page. We can supply as individual fence panels or as continuous lengths to wrap around an entire perimeter in one go.Finished Heras fence cover 3370mm x 1755mmFully weatherproof Ready to fit Perfect for brand promotions Cover unsightly areas from view Simple yet effective advertising
AirMesh Flag 115gsm
£14.95 - £17.95 / SQ M More Information5.0/5 - 4 Review(s)Reduce Wind Loading AirMesh Flag contains thousands of tiny holes which allows wind to pass through. This significantly reduces structural wind-loading making it ideal for fencing, high installations and giant banners. AirMesh Flag Specifications115gsm Polyester fabric, strong yet lightweight Flame Retardant, certificate available to download Dye-sublimation printed for vivid coloursAirMesh Finishing Crucial to the quality and longevity of any AirMesh Flag are the methods used to finish it. We offer stitched hems, eyelets and/or pole pockets as standard. Options include Grab Handles, Velcro, Silicone Strip, Keder and much more. Check our Guide to Pole Pockets on Banners. Airmesh Flag 115gsm Sizes We print Airmesh Flag fabric on rolls up to 3m wide. Larger banners are stitch seamed together in panels. AirMesh Printing Printing of AirMesh Flag is by digital dye-sublimation, producing vivid deep colours. We print in CMYK meaning that you can include any logos, text and photographs in your designs. Alternative Products AirMesh Flag is an ideal solution for many applications. Here are some alternatives for you to consider… Mesh Banner Larger and more exposed banners will act as a giant sail when the wind hits. This can rip the banner from its fixings or cause damage to the structure it is fitted to. Mesh PVC and Fabric materials benefit from thousands of tiny holes which allow some wind to pass through, thus reducing wind loading. Fabric Banners We offer a wide range of polyester and cotton based fabrics suitable for internal and external banners. Fabrics benefit from looking better, being much lighter (from 115gsm) and from being more environmentally-friendly. Fabrics are printed using our dye-sublimation process which produces stunning rich hues and vibrant eye-popping colours.Check our Guide to Pole Pockets on Banners.
PVC Scaffold Banners 500gsm
More Information5.0/5 - 1 Review(s)This hardwearing and durable 500gsm pvc banner is printed using high-quality UV print technology. The UV print process allows us to make high-quality durable pvc banners which will stand up to the elements. UV is a very effective way of manufacturing high-quality vibrant banners at very reasonable cost.• M1/B1 Fire rated product with certificate required upon request • High-Quality 500gsm material • Suitable for use on Scaffolding • UV printed so fade and scratch resistant Prices you see below are the prices you pay guaranteed!Printed pvc banners will are finished to your specific requirements free of charge – with either hems and eyelets or with pole pockets.For more information on banner design, fitting techniques and technical specifications, call us. If you need information regarding resolution then please click here for full dpi and ppi explanations.Standard delivery turnaround is 5-6 working days from confirmation. Need it quicker? Call us for details.Please note if you are not happy to wait 5-6 working days then please call us to discuss on 01253 897 840 Heavyweight Premium PVC Scaffold Banners onto 500gsm material Heavyweight and durable, our 500gsm PVC banners are printed using high quality UV print technology. This print process allows us to make high quality durable banners which will stand up to the elements. How can we print a quality product so cost effectively? Simple. All our print jobs are batch processed which allows us to take advantage of the economies of scale. On a daily basis we are processing large format printing jobs from all over Europe. Your job, even if it is a one-off event banner, will be printed alongside dozens or hundreds of others. Banner Finishing Crucial to the quality and longevity of any scaffold banner are the methods used to finish it. Traditionally, banners were always stitched. Whilst we still offer stitching (always on fabric materials), we more commonly use high-frequency welding on our PVC scaffold banners. This gives a much stronger, more predictable and more aesthetically pleasing finish than stitching. Banner Sizes We print Scaffold Banners on roll widths up to 5 metres wide. Larger Scaffold Banners are recommended to be made from our Mesh materials to reduce wind-loading. Scaffold Banners - Fitting MethodsScaffold Poles Top & Bottom - Smaller Scaffold banners can be secured by sliding a scaffold pole through top and bottom sleeves. The bottom pole can be adjusted to provide tension. Bungee Ties - Bungee or Shock Cord can be run through eyelets on your banners to secure them to the structure. This provides a little give for wind gusts. Scaffold Frame & Bungee - a steel wire frame can high-quality though eye bolts approximately 300mm outside the banner. Once the wire is tensioned, the banner can be fitted using a zig-zag of bungee cord. This gives the effect of a trampoline on its side, tensions the banner and allows some 'give' for high winds.
PVC Mesh Scaffold Banners 330gsm
£9.50 - £10.50 / SQ M More InformationPVC Mesh scaffold banners allow air and some light to pass through, which means less resistance to gusts of wind. Ideal for high building and scaffolding wraps. Billowing, flapping and the risk of your banner ripping are all reduced.Mesh is also lighter in weight than a traditional frontlit banner. Normal PVC banners are not recommended in winds of 30mph+ as hems and eyelets can be ripped out.FittingA professional survey of your intended installation site is advisable for any banners over 25 square metres in size. A surveyor will calculate wind-loading on the structure and advise on the fixings necessary.Larger Mesh Scaffold Banners such as Building Wraps are normally installed in sections, straight onto scaffolding using Bungee Shock Cord. Your scaffolder should ensure that no pole ends are projecting so that they may damage your banner.Without scaffolding, large mesh banners can also be installed using a wire cable frame and a criss-cross effect of bungee rope. This method allows even more give when the wind hits the mesh banner and ensures a secure and long-lasting installation.FinishingAs standard we hem and eyelet our Mesh Banners all round with heavy duty webbing and metal eyelets. Pockets to slide poles through can be provided at no extra cost, please specify the pole diameter in your order notes.
Double Sided Scaffold Banner 650gsm
£24.00 - £27.00 / SQ M More InformationSupreme, top-of-the-range double sided scaffold banners. These banners are tougher and last longer any other double-sided banner on the market.Our blockout material is used for the production of double sided banners. Between two layers of white banner there is a black separator which prevents the banner from being semi-transparent.When quality and strength is paramount, this material is super strong and top of the range so is ideal for use on single sided banners too.This material is also often used for cafe barrier banners, projecting-wall banners and lamp post banners.
PVC AirMesh Banners 235gsm
£10.50 - £12.75 / SQ M More Information5.0/5 - 1 Review(s)Lightweight and Windproof AirMesh is lighter in weight than a traditional frontlit banner. Normal PVC banners are not recommended in winds of 30mph+ as hems and eyelets can be ripped out. PVC AirMesh SpecificationLightweight open weave 235gsm PVC Mesh Flame retardant to B1 specification, certificate available High tensile strength Nickel plated silver eyelets with 12mm diameter hole Fade proof, waterproof and scratch resistant Fully finished to specificationPVC AirMesh Installation A professional survey of your intended installation site is advisable for any banners over 25 square metres in size. A surveyor will calculate wind-loading on the structure and advise on the fixings necessary.Larger AirMesh Banners such as Building Wraps are normally installed in sections, straight onto scaffolding using Bungee Shock Cord. Your scaffolder should ensure that no pole ends are projecting so that they may damage your banner.Without scaffolding, large mesh banners can also be installed using a wire cable frame and a criss-cross effect of bungee rope. This method allows even more give when the wind hits the mesh banner and ensures a secure and long-lasting installation. PVC AirMesh Finishing As standard we hem and eyelet our Mesh Banners all round with heavy duty webbing and metal eyelets. Pockets to slide poles through can be provided at no extra cost, please specify the pole diameter in your order notes. Check our Guide to Pole Pockets on Banners. Alternatives to PVC AirMesh Banner 235gsm We offer a range of mesh banner materials. Here are some alternatives for you to consider... PVC Mesh Banner 330gsm This is a slightly heavier material with less holes and is our most popular mesh pvc material. AirMesh Flag 115gsm At only 115gsm, AirMesh Flag is our lightest mesh fabric. As a polyester-based fabric, it is also much more environmentally friendly than PVC products. Express Mesh Banner Ideal for smaller mesh banners required very quickly. Printed on our smaller machines and limited in size to 1.25m in one dimension.
Site Boards
£39.00 - £65.00 / each More InformationConstruction Site Boards Full colour printed onto 10mm thick foamex, our site boards will grab attention. How can we print a quality product so cost effectively? Simple. We price our Site Boards for trade clients who use us time and time again. Our printing equipment and finishing processes are tuned to high quality and high efficiency. Print Finishing Crucial to the quality and longevity of any site board are the methods used to finish it. Our prints are covered with a protective laminate to stop them from fading in the sun and to make them easy and safe to clean off.
Scaffold Signs
£69.50 - £120.00 / each More InformationSteel Scaffold Signs measuring 915mm x 610mm (3ft x 2ft) with frame, fixing brackets and a tough double-sided printed panel made from 10mm thick PVC plastic (Foamex). Not to be compared to the cheap Correx panels from other suppliers which can blow out in the wind.Our printed boards are scratch-resistant and fade-resistant, being coated with a tough UV-protective clear laminate.The boards are CNC routed prior to printing to ensure a perfect fit within our steel frames. The frame is clamped around the signboard meaning that the board will never work loose like a thin correx panel or be in danger of blowing out in the wind.Printed Boards are also available separately.Minimum order quantity - 10 signs.
Building Wraps
£10.50 - £11.50 / SQ M More Information5.0/5 - 1 Review(s)Building Wraps are used typically to dress a building under construction or renovation and are used to cover scaffolding. Full colour printed at high resolution for stunning graphic effects, the fine mesh allows wind to pass through.PVC Mesh banners allow air and light to pass through, which means less resistance to gusts of wind. Ideal for building wraps our PVC Mesh banners are printed using UV technology. Mesh is also lighter in weight than a traditional frontlit banner.Normal PVC banners are not recommended in winds of 30mph+ as hems and eyelets can be ripped out.A professional survey of your intended installation site is advisable for building wraps over 25 square metres in size. A survey will calculate wind-loading on the structure.Where scaffolding is not already in place, large building wraps can be installed using a wire cable frame and a criss-cross effect of bungee shock cord. This method allows even more give when the wind hits and ensures a secure and long-lasting installation. Building Wraps Finishing Crucial to the quality and longevity of any building mesh wrap are the methods used to finish it. Traditionally, banners were always stitched. Whilst we still offer stitching (commonly on fabric materials), we more commonly use high-frequency welding on our Building Wrap Mesh banners. This gives a much stronger, more predictable and more aesthetically pleasing finish than stitching. Building Wraps Sizes We print Building Wrap Mesh on roll widths up to 5 metres wide. Wraps larger than 5 metres both horizontally and vertically will be joined with a weld. Building Wraps Fitting MethodsScaffold Frames - Building Wraps are most often installed onto existing scaffolding. Your scaffolding contractor can be instructed to make a simple frame, to which your wrap is attached using strong bungee shock cord. Bungee Ties - once fixing points have been completed on the wall - typically large eye or hook bolts - bungee clips or ties can be used to attach to the banner eyelets. This method tensions the banner as well as allowing some give when the wind hits, thus protecting hems and eyelets. Wire Frame & Bungee - a steel wire frame can be run though eye bolts approximately 300mm outside the banner. Once the wire is tensioned, the banner can be fitted to the wire using a zig-zag of bungee shock cord - this is best done in short sections of 4-5m. This gives the effect of a trampoline on its side, tensions the banner and allows some give for high winds.
Construction signs include fence covers, banners, siteboards, scaffold banners and more. We cover a huge range of signage for the construction industry, from logo stickers for your hard hats to huge building wrap meshes, scaffold banners, scaffold signs, hoarding panels and heras fencing covers.
Construction sites often offer incredible branding and promotion opportunities without the complications of requiring specific planning permission. Carefully designed graphics will enhance the site, providing information to staff and passers-by.
COST-EFFECTIVE
The scale of our operation offers huge cost savings to construction sites and companies, even on smaller orders.
HIGH SPECIFICATION MATERIALS
We use only the highest specification materials, recommended for the job and with regard to health and safety and fire regulations.
DESIGN & BRANDING SPECIFICATIONS
We adhere to your branding and design requirements, ensuring consistency of production and quality across your sites.
All jobs are proofed back to you for approval on PDF files prior to production.
